Henan Yishen Machinery Co., Ltd

 

The traditional oil press absorbs the advantages of the same type of large and medium-sized oil press at home and abroad, retains the length of the spiral oil press, and the output is greatly improved, which is suitable for pressing rapeseed, soybean, peanut, sunflower seed, sesame, tea seed, corn germ and other plant oils suitable for cold pressing.

 

The traditional oil press is a common agricultural machinery, and it is easy to see a piece of equipment in rural areas. However, China has no specific system, structural standards and unified technical indicators for oil press equipment. Make the oil press equipment on the market mixed. The purchase of good equipment should pay attention to daily operation to prevent damage.

 

 

Whether it is before the boot, or after the boot should pay attention to the control of temperature, temperature is very important for the entire oil pressing process.

 

Before starting: The traditional oil press, which is very popular now, only needs to set the required temperature before starting the press, and you can start the oil press, which can not only reduce the wear of the equipment itself, but also effectively improve the oil yield. In the past, the traditional oil press has no heating and temperature control system, and people will press the oil cake into the machine before opening the press, which can effectively improve the temperature of the equipment, which is the so-called heat machine, when the equipment reaches a certain temperature, it begins to feed the press. Therefore, like the oil press equipment with temperature control and heating system, after a long time of work, it is necessary to close the heating system, and the friction temperature of the oil and the equipment is enough, without heating to supplement.

 

After boot: Many manufacturers of processing grease, because of the large amount of tasks, the equipment is turned on for a day or four or five hours, and the wear of the equipment is very large for a long time of work. When the oil is pressed out, the pressure and temperature are required, and these two points can effectively improve the oil yield. There is no temperature, pressure oil yield will be very low. Take the traditional cold press oil material, if there is no temperature in the press chamber, it is difficult to press oil. Cold pressing is not that there is no need for temperature, but the lack of steaming and frying process for oil, and the appropriate temperature of the press chamber can achieve a good oil effect.

 

 

 

http://www.yysmachine.com/